Banner Q45 Series User Manual download pdf

Banner model 45SD plug-in bus cards enable a Banner Q45X Series sensor to

establish a logical relationship between the sensor's output and other compat-

ible devices on an SDS

™

bus network. 45SD cards are part of a family of bus

expansion cards for Q45X sensors which includes models for use on AS-

Interface, DeviceNet

™

, Seriplex

, and other data buses.

Use of a 45SD bus expansion card turns the Q45X into a "smart" sensor which

can be connected to an SDS bus network using a simple "dumb drop" junction

box or a "T" connector. Plugging a bus expansion card into a Q45X Series

sensor automatically converts the basic sensor outputs to a pair of datacom

connections with the proper protocol for use on an SDS

™

bus network. Q45X

sensors without bus cards (i. e. "dumb sensors") may also be added to any bus

system, via a "smart drop" junction box. Basic Q45X sensors (without bus

expansion cards) interface directly to PLC dc inputs. See the functional

schematics on the other side of

this data sheet. The block dia-

gram at the right illustrates how

"smart" and "dumb" Q45X Series

sensors can be mixed together on

the same bus network.

On a Q45X Series sensor with a

45SD1 expansion card installed, a

green LED lights to indicate

POWER ON, and a red LED indi-

cates received light signal strength

by means of Banner's patented

†

AID

™

system (see below).

NOTE: The yellow sensor LED is

disabled when a bus network card is installed.

Emitter model Q45X6EQ has green indicator only.

SDS™ is a trademark of Honeywell Micro Switch Division

Printed in USA P/N 39669D6B

For use with Q45X Series Photoelectric Sensors on SDS

™

Bus Networks

45SD Series Bus Expansion Cards

Data

Input

PLC

Q45X

Q45XQ45XQ45XQ45XQ45X

Q45X Q45X Q45X Q45X

"Dumb" Sensors

(x4)

"Smart" Sensors

(x4)

Smart

Drop

Dumb

Drop

"T"

"Dumb" Sensors

(x3)

"Smart" sensor

Connector

Bus

Specifications, Q45X Series Sensors using 45SD Expansion

Card (see Q45X data sheet, p/n 37735, for further information).

Supply voltage and current:

The sensor is powered by the bus network (11 to 25V dc; 60

mA combined current for Q45X sensor and 45SD card).

Output configuration: Standard CAN transceiver, non-isolated.

Conforms to SDS

™

protocol.

Circuitry protection: Protected in the event of reverse power

supply polarity and loss of ground (neither condition will harm

the sensor or interrupt other communications on the network).

Sensor response time: 2 milliseconds. The total response time

is the sum of the sensor response time and the network response

time.

Status indicators (visible through transparent sensor top cover):

A green LED lights to indicate POWER ON; a red Banner AID

™

System (

†

U.S. patent no. 4356393) LED lights when the sensor is

seeing it's modulated light source, and pulses at a rate proportional

to the strength of the received light signal. Emitter model Q45X6EQ

has green indicator only.

Cable: Sensors require SDS

™

5-pin mini-style quick discon-

nect cable, available from Turck, Lumberg, or Brad Harrison

(see page 2).

Operating temperature range: -10 to +70°C (14 to +158°F)

Relative humidity: 0 to 95%, non-condensing

Model Part No. Used with Sensor Communication

45SD1 40060 All Q45XB6 models, SDS level 4 binary input 1.1.1.5

except emitter

45SDE1 40908 Q45X6EQ emitter Allows emitters to be powered from the bus;

not communicate

1 2 3 4 5 6

Summary of Contents

Page 1 - Bus Expansion Cards

Banner model 45SD plug-in bus cards enable a Banner Q45X Series sensor toestablish a logical relationship between the sensor's output and other c

Page 2 - 45SD Bus Expansion Cards

Q45X sensor hookup, 45SD expansion card installed(Q45X base, male connector):RemovalModules are removed through the top of the sensor. The procedure

Page 3 - ATTRIBUTES

SDS Model Specification for 45SD1 Bus CardThe 45SD card conforms to the following SDS model: Level 4 Binary Input, 1.1.1.5ATTRIBUTESAttribute Descript

Page 4

9 Bus Diagnostics Register: This is a 2 byte read only register. When an error occurs, the corresponding bit is set.Byte 1bit 0 ROM Checksum Errorbi

Page 5

61 Configuration Register:This is a single byte, 8 flags.bit 0 - 2 not used.bit 3 Disable re-transmission of COS messages R/W . When this bit is set

Page 6

0 Diagnostic Event Counter: This event is sent when ever a flag in attribute 9 is set. This event also sends one databyte. This byte contains the v

Banner Q45 Series User Manual

Browse online or download User Manual for Sensors Banner Q45 Series. Banner Q45 Series User Manual

Summary of Contents

More documents for Sensors Banner Q45 Series

Comments to this Manuals

Banner Q45 Series User Manual

Browse online or download User Manual for Sensors Banner Q45 Series. Banner Q45 Series User Manual

Summary of Contents

More documents for Sensors Banner Q45 Series

Comments to this Manuals

Related products and manuals for Sensors Banner Q45 Series