Banner SureCross DX80 Wireless Networks User Manual download pdf

Configurable FlexPower Node with an integrated battery and 1-wire serial interface for one 1-wire serial sensing device

The SureCross® wireless system is a radio frequency network with integrated I/O that can operate

in most environments and eliminate the need for wiring runs. Wireless networks are formed around

a Gateway, which acts as the wireless network master device, and one or more Nodes.

• Wireless industrial I/O device with a 1-wire serial interface to handle one 1-wire serial sensing

device

• FlexPower® technology driven by one lithium primary battery integrated into the housing

• DIP switches for user configuration

• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple Access

(TDMA) control architecture ensure reliable data delivery within the unlicensed Industrial, Scien-

tific, and Medical (ISM) band

• Transceivers provide bidirectional communication between the Gateway and Node, including

fully acknowledged data transmission

• Lost RF links are detected and relevant outputs set to user-defined conditions

For additional information, updated documentation, and accessories, refer to Banner Engineering's

website, www.bannerengineering.com/surecross.

Models Frequency Environmental Rating I/O

DX80N9X1S1S 900 MHz ISM Band

IP67, NEMA 6

Inputs: 1-Wire serial interface for one 1-wire serial sensing

device

DX80N2X1S1S 2.4 GHz ISM Band

External antenna models listed. Internal antenna models are also available. For more information, contact your local Banner Engineering

Corp. representative.

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to serious

injury or death. This device does not include the self-checking redundant circuitry necessary to allow its

use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-

energized sensor output condition.

SureCross User Configuration Tool

The User Configuration Tool (UCT) offers an easy way to link I/O points in your wire-

less network, view I/O register values graphically, and set system communication pa-

rameters when a host system is not part of the wireless network.

The UCT requires a special USB to RS-485 (model number BWA-UCT-900 for 1 Watt

radios, BWA-HW-006 can be used for all other radios) converter cable to pass infor-

mation between your computer and the Gateway. Download the most recent revi-

sions of the UCT software from Banner Engineering's website: http://www.banneren-

gineering.com/wireless.

Setting Up Your Wireless Network

To set up and install your wireless network, follow these steps:

1. Configure the DIP switches of all devices.

2. Connect the sensors to the SureCross devices.

3. Apply power to all devices.

SureCross DX80 Serial Node with Integrated Battery

P/N 137322 Rev. F 6/20/2013

0 137322 8

1 2 3 4 5 6 7

Summary of Contents

Page 1 - 0 137322 8

Configurable FlexPower Node with an integrated battery and 1-wire serial interface for one 1-wire serial sensing deviceThe SureCross® wireless system

Page 2 - DIP Switch Settings

4. Form the wireless network by binding the Nodes to the Gateway. If the binding instructions are not included in the datasheet, refer tothe product m

Page 3

SwitchesDevice Settings 1 2 3 4 5 6 7 8Sensor 1: 6 inputs, 6 outputs (Primary and secondaryI/O 1-3)OFF ON ONSensor 1 & 2: 3 inputs, 0 outputs (Pri

Page 4 - Modbus Register Table

Sample and Report RatesThe sample interval, or rate, defines how often the SureCross device samples the input. For battery-powered applications, setti

Page 5 - Specifications

I/O Point Modbus Holding Register I/O TypeGateway Any Node5 5 5 + (Node# × 16) Serial device 1, secondary input 2; OR Serial device 2, primary input 2

Page 6

Radio and GeneralRange900 MHz: Up to 4.8 kilometers (3 miles)2.4 GHz: Up to 3.2 kilometers (2 miles)Transmit Power900 MHz: 21 dBm (150 mW) conducted2.

Page 7 - Warnings

Sensors Part No. Model No. Description Datasheet79610 M12FTH1QTemperature and Humidity Sensor, ±2% Accuracy1-wire serial interface13730381050 M12FTH2Q