Banner S18 Series User Manual download pdf

Printed in USA 10/07 P/N 35749 rev. D

S186ELD(Q) Laser Diode Emitter

Class 1 Laser for Use With Banner Modulated Photoelectric Receivers

WARNING . . .

Not To Be Used for Personnel Protection

Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.

These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A

sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner

Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.

Features

• Self-contained Class 1 modulated visible laser diode emitters permit higher gain and

extended range in opposed mode sensing systems

• Narrow effective beam for small-object detection or for precise position control

• 10 to 30V dc operation; third wire extinguishes laser light when connected to +V dc

• Compatible with all EZ-BEAM

receivers; may also be used with a variety of other

Banner modulated photoelectric receivers (see Excess Gain chart below)

• Popular 18 millimeter threaded barrel design

Models

Model Range Cable* Supply Voltage Effective Beam at Receiver at 25° C

S186ELD

Range varies, depending on

which receiver is used (see

Excess Gain chart, page 2).

2 m (6.5')

Unterminated

10 to 30V dc

Opposed Distance

1.5 m (5')

3 m (10')

6 m (20')

15 m (50')

30 m (100')

Beam Width

4 mm (0.2")

5.5 mm (0.2")

8.5 mm (0.3")

18 mm (0.7")

32 mm (1.3")

S186ELDQ

4-wire Euro-style

QD connector

* 9 m cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., S186ELD W/30).

A model with a QD connector requires a mating cordset; see page 4.

Excess Gain

Excess Gain of the S186ELD emitter is dependent on the receiver used. Following is a comparison of the excess gain for recommended

receivers at 15 m (50'). For information on compatibility of the S186ELD emitter with other Banner photoelectric receivers, contact the factory

Applications Group at the address or numbers listed on the back cover.

MULTI-BEAM

MAXI-BEAM

VALU-BEAM

EZ-BEAM

MINI-BEAM

ECONO-BEAM

Others

Excess Gain at 15 m (50')

SBRX1

3,000

RSBR

750

SMW95R

5,000

T18SN6R

400

SM31R

300

SE61R

SM51RB

140

SBR1

3,000

RSBRSR

120

SMI91RQD

3,000

T30SN6R

400

SM31RL

1,700

SE61RMHS

Q23SN6R

SBRXD1

3,000

S12SN6R

400

SM31RMHS

200

Q10AN6R

SBRD1

3,000

SM31RLMHS

1,100

Q45BB6R

1,500

1 2 3 4

Summary of Contents

Page 1 - Excess Gain

Printed in USA 10/07 P/N 35749 rev. DS186ELD(Q) Laser Diode EmitterClass 1 Laser for Use With Banner Modulated Photoelectric Receivers WA

Page 2 - S186ELD Laser Diode Emitter

S186ELD Laser Diode Emitter2 P/N 35749 rev. D Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Ali

Page 3

S186ELD Laser Diode Emitter P/N 35749 rev. D 3 Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.316

Page 4

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengi

Banner S18 Series User Manual

Browse online or download User Manual for Sensors Banner S18 Series. Banner S18 Series User Manual

Summary of Contents

More documents for Sensors Banner S18 Series

Comments to this Manuals

Banner S18 Series User Manual

Browse online or download User Manual for Sensors Banner S18 Series. Banner S18 Series User Manual

Summary of Contents

More documents for Sensors Banner S18 Series

Comments to this Manuals

Related products and manuals for Sensors Banner S18 Series