Banner Safety Mat Monitoring Modules User Manual download pdf

SM-GA-5A (12-24V dc / 115V ac operation) and SM-HA-5A (12-24V dc / 230V ac operation)

The user is responsible for satisfying all local, state, and national laws, rules,

codes, and regulations relating to the use of this product and its application. Banner

Engineering Corp. has made every effort to provide complete application, installa-

tion, operation, and maintenance instructions. Please direct any questions regard-

ing the use or installation of this product to the factory applications department at

the telephone numbers or address shown found at http://www.bannerengineer-

ing.com.

The user is responsible for making sure that all machine operators, maintenance

personnel, electricians, and supervisors are thoroughly familiar with and understand

all instructions regarding the installation, maintenance, and use of this product, and

with the machinery it controls. The user and any personnel involved with the instal-

lation and use of this product must be thoroughly familiar with all applicable stand-

ards, some of which are listed within the specifications. Banner Engineering Corp.

makes no claim regarding a specific recommendation of any organization, the accu-

racy or effectiveness of any information provided, or the appropriateness of the pro-

vided information for a specific application.

Model Supply Voltage Outputs Output Rating

SM-GA-5A 12-24V dc or 115V ac 4 Normally Open Safety

1 Normally Closed Aux.

2 Solid-State Aux.

N.O. Safety Outputs: 6 A

N. C. Aux. Outputs: 5 A

SS Aux Outputs: 100 mA

SM-HA-5A 12-24V dc or 230V ac

For complete technical information about this product, including dimensions, accessories, and specifications, see www.BannerEngineering.com and search

for

122364_web.

WARNING: Not a Stand-Alone Safeguarding Device

This Banner product is not a stand-alone point-of-operation guarding device, as defined by OSHA regulations. It is necessa-

ry to install point-of-operation guarding devices, such as safety light screens and/or hard guards, to protect personnel from hazardous

machinery. Failure to install point-of-operation guards on hazardous machinery can result in a dangerous condition which

could lead to serious injury or death.

Overview

Safety Mat Monitor Modules SM-GA-5A and SM-HA-5A (the "Safety Module") are used to verify the proper operation of 4-wire presence-sensing switching mats (sensors).

SM-xA-5A Safety Mat Monitoring Modules

P/N 122364 rev. C 8/22/2012

0 122364 4

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Overview

SM-GA-5A (12-24V dc / 115V ac operation) and SM-HA-5A (12-24V dc / 230V ac operation)The user is responsible for satisfying all local, state, and nati

Page 2 - Electrical Installation

Multiple mats may be switched in series to one Safety Module. The Safety Module provides the redun-dant safety outputs required for creating a control

Page 3

The Safety Module is powered by either a 12-24V dc supply at 4W or an ac supply (115V ac, model SM-GA-5A, or 230V ac, model SM-HA-5A) at 7VA. The sens

Page 4 - Automatic Reset Mode

If Rm is: ThenLess than 150 ohms AND you are using an ACsupply or DC supply greater than 20V dcThe mat resistance is acceptable and the safety mat che

Page 5 - External Device Monitoring

For Overvoltage Category III installations with applied voltages from 151V to 250V ac/dc applied to the output contact(s): the Safety Module may be us

Page 6 - Specifications

1. Remove power to the machine control elements, if it is already connected.2.Apply force to the mat’s sensing area, using a test piece as outlined in

Page 7 - EC Declaration of Conformity

Category SpecificationAC-1: 250V ac, 5A; DC-1: 24V dc, 5AAC-15: 230V ac, 2A; DC-13: 24V dc, 4APower: 5 W (5 VA)Mechanical life: > 50,000,000 operat

Page 8

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING

Banner Safety Mat Monitoring Modules User Manual

Browse online or download User Manual for Special machinery Banner Safety Mat Monitoring Modules. Banner Safety Mat Monitoring Modules User Manual

Summary of Contents

More documents for Special machinery Banner Safety Mat Monitoring Modules

Comments to this Manuals